instructions                                                                                                                              

  1. Use 12 shower curtain rings (not included) to attach your aircurv™ shower curtain to your shower curtain rod with the inflation port facing outward.                                                                                                      

  2. The bottom section of aircurv™ consists of two panels. Place the inner panel inside the bathtub. The outer panel remains outside the bath.                                                                                                                                           

  3. Using the inflation port and your breath, sufficiently inflate the aircurv™ to cause the asterisk pattern to create the outward curve. CAUTION: Do not overinflate! Overinflating aircurv™ will make it more difficult to invert and could result in a compromised seam, leading to an air leak. 4 or 5 breaths is usually enough. Once inflation is complete, close the inflation port and press it inward.                                                                                                                                                          

  4. After exiting the shower, you can invert aircurv™. To invert, use your foot to hold the bottom center of the outer panel in place and press inward on the center of the asterisk. aircurv™ will invert into the shower area. To use the shower, step into the bathtub and reverse the process.                                                                                                                                

  5. Should your aircurv™ require cleaning, wipe with a clean damp microfiber cloth.

NOTE: Your aircurv was stored and shipped tightly packed and this may cause the inflation port to be temporarily warped. This may cause your aircurv to partially deflate overnight after first installing it. The inflation port should return to its original shape after a couple of days, and your aircurv should only need a half breath or so of re-inflation every couple of weeks.